GSM Key - caller ID and SMS remote control switch
Remote Control by GSM (CLIP / Caller ID or SMS based remote control switching)
Open your electric gates, activate your alarm, control your security shutters, switch on your heater, lights or other device ...with a single FREE mobile phone call or by sending a text message
By using your mobile phone via CLIP or SMS text messages you can:
- Open and close garage door and gates
- Switch on/off heating, pumps for a defined time period
- Be infomed on status of your alarm
- Monitor arrival and departure of visitors
- Use one remote control only (your mobile phone) for any number of access points
Features:
- Power supply from distribution net 12V or alternatively from the main power supply (12V adapter). Also there can be used a backup battery 12V with a charging adapter.
- 2 inputs for switching contacts (alarm output, sensors etc.) (5V)
- When there is a short circuit at input preprogrammed, SMS text message is sent to a preprogrammed number (for each input you can store a unique text SMS and also a predefined destination number)
- When there is a short circuit at input, the GSM Key is ringing progressively up to 8 preprogrammed numbers (ALARM1 to ALARM8)
- 2 galvanically separated switching contacts 230V/ 5A
- 1 switching contact control by ringing only from an authorised number (contact closed for a preprogrammed specific time )
- The size of authorised numbers is limited only by SIM card capacity (250). The numbers can be saved under different names
- Both outputs are controlled by SMS from authorised numbers at 2nd level (ALARM). It is possible to control closing remotely, you can make a disconnection or closing for a defined time of 1-99 minutes
- Settings of all parametres (authorised numbers, unit time, competence etc.) as well as the complete control of the unit (for example: remote dialling of different number which is different from the preprogrammed one) by SMS text message from authorised numbers at 3rd level (ADMIN)
- Checking credit level. Resending mobile operator´s SMS text messages to a predefined GSM number.
- Settings of all parametres via PC through RS 232 port. All parametres can be programmed directly on SIM by a mobile phone or remotely by SMS
- System interface for optional devices
Technical Specifications and Benefits:
- Authorize up to 250 mobile phones to work with GSM Key Switch. To add new users -
- just add their mobile number onto the SIM.
- No key fob or proximity card costs represent significant cost savings
- Connect up to 2 electrical devices
- Three GSM Key user levels;
- Level 1 - basic user
- Level 2 - alarm access
- Level 3 - administration of users and unit parameters for levels 1 and 2
-
- Mains powered, 12V adaptor included. 12V battery back-up with charger also available.
- Receive a phone call or text message alert when your alarm goes off (ability to call up to 8 preprogrammed numbers progressively)
- 2 galvanically separated switching contacts (230V/ 5A)
- Setting of all parameters via PC through RS232 port. All parameters can be programmed directly on SIM by mobile phone or remotely by SMS
- 1 switching contact control by ringing only from authorized number (contact closed for pre-programmed fixed time)
- Checking of credit level. Sending SMS comimng from an operator to preprogrammed number.
- Dimensions: W 145 x H 75 x D 30mm