Product Description
Cellvine’s highly compact indoor repeater has been designed to enhance and extend cellular coverage into small size buildings, restaurants, underground areas, office buildings and other similar indoor environments.
The unit is very simple to install and can be set to automatically obtain maximal coverage. Installing the unit requires two antennas: one on the outside of the building to receive incoming cellular signals from nearby base stations, and the other antennas
inside the indoor coverage area. The unit is connected between the Outdoor & Indoor antennas to amplify both the base station and the mobile cellular signals.
Features
- High linearity & low noise amplifiers for maximal coverage
- Compact size with high reliability
- Simple installation
- Automatic Gain Control (AGC),
- Automatic gain balance for UL & DL
- channels
- Coupled antenna port for installation
- of two indoor antennas
- Designed to transmit CDMA Signal
- Frequency Range
- Down 463.1-467.35Mhz
- Up 453.1-457.35Mhz
- Output Composite Power IS-95 , 1FA -45dBc ACPR +11dBm
- System Max Gain +60dB
- Pass Band Ripple 4 dB p-p
- Noise Figure < 5 dB
- Gain range 20dB in 1dB steps
- VSWR 2:1 MAX
- Operating Conditions Indoor , -5 to +45C ambient
- Indicators \ Controls
- Green Led: Power
- Red Led: Alarm
- Manual gain adjustment screws
- AGC UL, AGC DL on/off switch.
- Alarms
- Single dry contact indicator N\C Indicates one (or more) of the following faults: DC failure\ Current Failure \Downlink power failure
- Dimension 350mm X 220mm X 50mm
- Power Requirements 8VDC, 0.8A from included power supplier
- RF Connector
- Base - N female
- Mobile – N female